108
Erasing Images (All Image Erase)
You can erase images one image at a time, or you can erase all images on the CF card at once.
This section describes how to erase all the images recorded on a CF card in one operation. To
erase images one at a time, see “Erasing a Recorded Image (Single Image Erase)”. (→47)
1Set the camera to PLAY.(→102)
●Press the 〈〉button.
The latest picture taken will be displayed.
2Press the 〈〉button.
The Erase menu appears.
3Turn the 〈〉dial to select [All…],
then press the 〈〉button.
The Erase Confirmation message appears.
4Turn the 〈〉dial to select [OK],
then press the 〈〉button.
The camera erases all unprotected
images.
●
Once an image is protected, it cannot be removed by the camera’s Erase function.
To erase a protected image, you must first remove the protection.(→107).
●Once an image is erased, it cannot be recovered. Make sure you no longer need
the image before erasing it.
If you protect the images you need (→107) and erase all the images at once, all
non-protected images will be erased. This is handy when you want to erase all the
images you do not need at once.