Connecting to a TV, 116 | Canon 9337B001, 30D28135, 30D1785 instruction

Connecting to a TV

You can connect the EOS D30 to a television (using the video cable provided with your camera) to display your recorded images. Always turn off the camera and the television before connecting or disconnecting them.

1 Open the cover.

2 Connect the cable.

● Connect the cable to the VIDEO OUT terminal on the camera and to the video input terminal on the TV.

● Insert the cable plug all the way, until it clicks into place.

3 Turn the TV on, and set the input switch to Video In.

4 Set the Main Switch to 〈ON〉.

Video input terminal

	5	Press the 〈 〉 button.
	5	The image appears on the TV screen.
		The image appears on the TV screen.

● You can use the TV to view images or make menu settings just as you would with the LCD monitor.

● When you finish, set the Main Switch to 〈OFF〉, turn the TV off, then disconnect the video cable.

● When using a TV screen display, we recommend that you connect the EOS D30 to a household power supply using the DC coupler. (→29)

●Images and menus do not appear on the LCD monitor while the video cable is connected to the camera.

●You can also switch the TV video signal to PAL (→123). The default setting is for the NTSC signal standard.

116

Image 116

Canon 9337B001, 30D28135, 30D1785 manual Connecting to a TV, Open the cover Connect the cable, 116

Contents

Page Digital Camera Operating Steps and Reference Guides Thank you for purchasing this Canon product Introduction Check Your Accessories Solution Disk Adobe 1Software Starter Guide !2WarrantyInterface Cable Video Cable VC-100 Canon Digital Contents 130 Reference101 EOS D30 Safety Precautions Page Avoid Condensation Related Problems Avoid Strong Magnetic FieldsIf Condensation Forms Inside the Camera Extended Storage Precautions for Handling Camera Lithium Backup Battery Quick Guide Set the Main Switch to Set the Mode Dial to 〈 〉 Open the CF card slot cover Insert the CF cardFull → 42 Auto Check the image Nomenclature Inside the expansion electronics cover Inside CF Card Slot Cover Nomenclature LCD Panel RAW Viewfinder Information Mode Dial Zone Compact Power Adapter CA-PS400 Back Conventions Used in This Manual Before You Begin Attaching the Strap Insert a fresh backup battery Replacing the Backup BatteryRemove the old backup battery Charging the Battery Pack Connect the power cordPlace the battery in the adapter Remove the cover Charging the Battery Pack Inserting the Battery Pack Battery Charge Remaining IconsOpen the battery chamber cover Load the battery into the camera Removing the Battery Pack Open the battery coverRemove the battery pack Close the battery cover Place the cord in the groove Using a Household Power SupplyConnect the DC coupler Detaching a Lens Mounting and Detaching a LensMounting a Lens Inserting a CF Card Removing a CF CardOpen the cover Remove the CF card Select the setting you want File Numbering SystemFrom Menu Select Numbering Shutter Button Main SwitchBasic Operation Using the Electronic Dials Basic Operations with the 〈 〉 DialPress a button and turn the 〈 〉 dial Just turn the 〈 〉 dial About the LCD Monitor Menu Functions and Settings Display the menuSelect the menu item Exit the menu Menu item Menu Selections and Default SettingsColor Setting type Description Setting the Date and Time From the Menu, select Date/TimePress the 〈 〉 button Set the date and time Date and time are set, and the display Turn the Dioptric Adjustment Knob Holding the Camera Simple Picture Taking Fully Automatic Picture Taking Simple Picture Taking Automatic Built-in FlashAF-Assist Light Check the Image in Play Mode Check the Image ImmediatelyView the image Change the displayed image From the Menu, select Review Select the Review settingChecking the Image After it is Taken Set the review time Time Images Are Displayed for CheckingTime Set the camera to Play mode Select the image you want to EraseOpen the Erase menu Erase the image Portrait Mode Landscape Mode Close-Up Mode Sports Mode Night Scene Mode Advanced Operations Quality Selection From the menu, select QualitySet the quality Quality Icon Recording About ISO Speed Select ISO SpeedSet the ISO speed Advanced Operations From the menu, select Parameters Selecting ParametersSet the parameters you want Parameter Setting Level Effect Parameters AF Mode Selection One-Shot AF for Still Subjects About Predictive AF AI Servo AF for Moving SubjectsAI Focus AF Focusing Point Selection Press the 〈 〉 button Select the focusing point Focusing On an Off-Center Subject Select a focusing point. →61 Focus on the subject Problem Subjects for Autofocusing Manual Focus INFO. Checking Camera Settings Camera Setting Information Selecting a Metering Mode Press the 〈 〉 button Select a metering mode Center-weighted Averaging Metering Metering ModesEvaluative Metering Partial Metering Size/Quality Selecting a Drive ModePress the 〈DRIVE〉 button Select the drive mode Setting the White Balance White Balance Settings Icon Conditions Custom White Balance Setting Photograph a white subjectFrom the menu, select Custom Select the image Select the white balance Set the Mode Dial to 〈 〉 Focus on the subject Program AE Shifting the Program Shutter Speed-Priority AE Check the display, then take Picture Shutter Speed Display Shutter Speed Priority AE Aperture-Priority AE Checking the Depth of Field Aperture Value Display Manual Exposure Set the aperture value Determine the exposure Check the display, then take the picture Set the Mode Dial to 〈 〉 Focus the pictureAutomatic Depth-of-Field AE Setting Exposure Compensation Select the exposure Canceling AEB Autoexposure BracketingFrom the menu, select AEB Set the AEB level AEB settings in 2/3-stop increments 〈 〉 modeAEB settings in 1/3-stop increments AE Lock Compose the shot and take the picture Self-timer Operation Select the self-timer Slip the eyepiece cover over Eyepiece Using the Eyepiece CoverRemove the eyecup Set the aperture value Set the Mode Dial to 〈 Set the shutter speed toBulb Exposures Press the shutter button down Fully again Mirror LockupPress the shutter button down fully Flash 4 Photography Using the Built-in Flash in the Creative Zone Using the Built-in FlashUsing the Built-in Flash in the Easy Shooting Zone Flash Sync Shutter Speed and Aperture Settings Mode Sync shutter speed Aperture ValueBuilt-in Flash Range Flash Photography Using the Built-in Flash On/off Red-eye ReductionFrom the menu, select Red-eye Place the center focusing point over FE LockMake sure the 〈 〉 icon Viewfinder is on Subject, and press Flash Exposure Compensation Press the 〈 〉 button Set the exposure compensation Amount Wireless Multi-Light E-TTL Autoflash →99 High-Speed Sync FP Flash →98FE Flash Exposure Lock →99 Flash Exposure Compensation →99 Taking Flash Pictures in Each Shooting Mode Full Auto FlashMake sure the 550EX Speedlite’s Pilot lamp is on High-Speed Sync FP Flash FEB Flash Exposure Bracketing Wireless Multi-Light/E-TTL Autoflash Photography Modeling Flash Using Non-Canon Flash Units Sync SpeedPC Terminal 100 About Image Data Taken or Recorded by Other Devices About Dpof Viewing Recorded Images Viewing a Single ImageViewing the Index Display the index Viewing Enlarged Images Jump Jumping to Another ImageChange the display area Images 103 INFO. Turning the Information Display On and Off Image Information Displayed During PlayHistograms High Brightness Warning Playing and Erasing Recorded Images 105 Automated Playback of Recorded Images Auto playbackFrom the menu, select Auto playback Go to Rotate mode Rotating an ImageRotate the image 106 Open the Protect Settings screen Protecting an ImageProtect the image Playing and Erasing Recorded Images 107 Erasing Images All Image Erase Turn the 〈 〉 dial to select All…, then press the 〈 〉 buttonTurn the 〈 〉 dial to select OK, then press the 〈 〉 button 108 Formatting the CF Card Press the 〈 ButtonTurn the 〈 〉 dial to select OK Then press the 〈 〉 button 110 Precautions for Printing from DPOF-compatible DevicesPrint Order Selecting Images for Printing Selecting a Single ImageSelect the images Playing and Erasing Recorded Images 111 Selecting All Images Select the print quantitySelect Mark all 112 Print Type Playing and Erasing Recorded Images 113 Specifying Date Printing 114 Specifying File Number Printing Playing and Erasing Recorded Images 115 116 Connecting to a TVOpen the cover Connect the cable Select C.Fn-13 Playing and Erasing Recorded Images 117 Select 1 Enable Clean the imaging element8Finish cleaning 118 Menu Function 6 Settings Screen Description List of Menu Functions120 Menu Function Settings 121 122 Menu Function Settings 123 Custom Function Settings 124Func. No Select no Menu Function Settings 125 Effects, remarks Screen Setting or change126 Menu Function Settings 127 128 SET Menu Function Settings 129 Aperture value CF CompactFlash CardDepth of Field 130 131 ExposureFile Numbering and Folders Format ISO SpeedRed-eye Phenomenon Shutter Speed 133 Function Availability TableAF Modes and Drive Modes Mode Blinking warning Description Remarks Exposure Warnings134 Auto selection AF Manual selection AF Metering method 135 Program LineProgram Line Description Shutter Speed and Aperture Value Readouts Shutter speed readoutAperture value readout 136 137 Error CodesMessage List Troubleshooting Power138 〈OFF〉 139 ShootingChecking and Handling Images Major Accessories Sold Separately 140 Timer Remote Controller TC-80N3 Remote Switch RS-80N3141 CF Card 142 System MapItems included with the Camera 143 IFC-200 PCU Major Specifications 144 145 White BalanceViewfinder Exposure Control 146 CA-PS400 Compact Power Adapter 147Camera Body DR-400 DC Coupler Index 148 149 115 150 151