Canon 9337B001, 30D28135, 30D1785 manual Using a Household Power Supply, Connect the DC coupler

Inserting and Removing the Battery Pack

Using a Household Power Supply

You can operate the EOS D30 from a household power outlet by using the DC coupler. This enables you to use the camera as long as you like without a battery.

1 Connect the DC coupler.

● Plug the DC coupler into the compact power adapter.

2 Place the cord in the groove.

● Carefully insert the cord into the groove.

3 Insert the DC coupler into the camera. ● Open the cover (→27) and lower the

covering on the cord channel.

● Insert the DC coupler and fit the cord into the cord channel.

● Check that the cord is placed tightly in the cord channel, and slide the DC coupler into the chamber until it locks into place.

● Close the cover so that it clicks into place.

4 Connect the power cord.

● Connect the power cord to the compact power adapter.

● Plug the cord into a power outlet.

● When you are finished, remove the plug from the power outlet.

●Do not use any DC coupler other than the one provided with your EOS D30 camera.

●Do not use the DC coupler provided with your EOS D30 with any other camera.

1

Before You Begin

29