Canon 9337B001, 30D28135, 30D1785 manual Selecting Parameters, Set the parameters you want

Selecting Parameters

In addition to the standard parameters automatically applied by the camera for processing images recorded, you can register up to three sets of your own parameters. Parameter settings are made using a computer and the software supplied with your EOS D30 camera, and stored in the camera by connecting the computer and camera with the proper interface cable provided with the camera.

For instructions on setting parameters with the software supplied with the EOS D30, as well as registering parameters in the camera and on connecting your camera to a computer, see the Software Starter Guide.

Note that if no custom parameters are set or stored using this function, this item will not appear on the menu.

1	From the menu, select [Parameters].
	● Press the	〈MENU〉 button.
	● Turn the 〈	〉 dial to select [Parameters],
	then press the 〈 〉 button.

The LCD monitor displays the available parameters.

2 Set the parameters you want.

● Turn the 〈 〉 dial to select the parameters,

then press the 〈 〉 button.

The selected parameters are entered, and the screen returns to the menu.

● Press the 〈MENU〉 button to clear the screen and exit the menu.

You can set the parameters by pressing the 〈 〉 button and turning the 〈 〉 or

〈 〉 dial as you look at the LCD panel. However if no parameters have been

registered, the message “ ” is displayed on the LCD panel and you cannot set the parameters. (C.Fn-12-3 →128)

56