06Changing the speaker setup
Set whether or not to use the speakers which are connected to the AV receiver or amplifier, as well as the size of the speakers. This setting is only valid for analog audio outputs.
Note
• Select Initial Setup from the HOME MENU, then press ENTER.
1 Select and set Speakers.
Use / to select, then press ENTER.
TOP MENU | TOOLS |
| ENTER |
HOME | RETURN |
MENU |
Closing the speaker settings screen
Press ENTER.
Adjusting the output level of the various speakers (Channel Level)
Adjust each output level of the different speakers by using test tones. This setting is only valid for analog audio outputs.
1 Select and set Speakers.
Use / to select, then press ENTER.
TOP MENU | TOOLS |
| ENTER |
HOME | RETURN |
MENU |
44
En
Initial Setup
BD PLAYER
Video Out | Audio Output Mode | |
Audio Out | Speaker Setup |
|
Speakers | Channel Level | Fix |
HDMI |
|
|
Language |
|
|
Parental Lock |
|
|
Options |
|
|
Setup Navigator |
|
|
2Select and set Speaker Setup Next Screen. Use / to select, then press ENTER.
Caution
•This cannot be selected when Audio Output Mode is set to 2 Channel. Change the setting to
3 Select the speaker and change the setting.
Use / to select, then use / to change the setting.
TOP MENU | TOOLS |
| ENTER |
HOME | RETURN |
MENU |
Speaker Setup
BD PLAYER
L/R 
Large
CYes
SL/SR Yes
SBL/SBR Yes
Use [ 
][ 
] to select a speaker, then press [ 
][ 
] to select speaker option.
•L/R (front left and right speakers): Small/Large (this setting also applies to the C, SL/SR and SBL/SBR speakers)
•C (center speaker): Yes/No
•SL/SR (left and right surround speakers): Yes/No
•SBL/SBR (left and right surround back speakers): Yes/No
Initial Setup
BD PLAYER
Video Out | Audio Output Mode | |
Audio Out | Speaker Setup |
|
Speakers | Channel Level | Fix |
HDMI |
|
|
Language |
|
|
Parental Lock |
|
|
Options |
|
|
Setup Navigator |
|
|
2Select and set Channel Level, then Fix or Variable. Use / to select, then press ENTER.
•Fix – The output level of all the speakers is set to the maximum.
•Variable – The output level of all the speakers is set 6.0 dB lower than when Fix is selected. From this point, the output levels of the L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted within the range of
•If you have selected Variable, proceed to step 3.
Caution
•This cannot be selected when Audio Output Mode is set to 2 Channel. Change the setting to
