03Chapter 3
Getting Started
Making settings using the Setup Navigator menu
Be sure to perform these settings when using the player for the first time.
Caution
•Before turning on the power, check that the connections between the player and other devices are correct.
1Turn on the power. Press STANDBY/ON.
STANDBY/ONOPEN/CLOSE
TV CONTROL
INPUT CH VOL
SELECT
2 Turn on the TV’s power and switch the input.
See the TV’s operating instructions for instructions on operating the TV.
Check that the Setup Navigator menu is displayed.
If TV Control is set, the TV can be operated with the player’s remote control (page 22).
If the Setup Navigator menu is not displayed
Press 
HOME MENU to display the Home Menu, select Initial Setup Setup Navigator Start, then press ENTER.
3 Select the OSD language.
Use / to select, then press ENTER.
TOP MENU | TOOLS |
| ENTER |
HOME | RETURN |
MENU | |
|
|
Setup Navigator
BD PLAYER
Please select the
Audio, subtitle and
language will also be set.
20
When you have this player connected to a Pioneer Flat Screen TV that is compatible with HDMI Control, language settings are imported from the Pioneer Flat Screen TV’s language settings before Setup Navigator begins.
4Select and set the video and audio output terminals. Select the actually connected video and audio output terminals.
Use /// to select, then press ENTER.
TOP MENU | TOOLS |
| ENTER |
HOME | RETURN |
MENU |
Setup Navigator
BD PLAYER
Select the output terminals to be used for the video and audio signals of this player.
VideoHDMI
AudioHDMI
Use [ 
][ 
] to select video or audio, then press [ 
][ 
] to select the output terminal.
•When HDMI is selected for Video or Audio, proceed to step 5.
•When Component Video is selected for Video, proceed to step 6.
•When
Setting item | Output terminal name | ||
Video | HDMI | HDMI Output |
|
|
| ||
|
|
|
|
| Component Video | Video Output | Component Video |
|
|
|
|
|
| ||
|
|
|
|
|
|
| Video |
|
|
|
|
Audio | HDMI | HDMI Output |
|
|
|
| |
Digital Audio | Digital Audio | Optical | |
|
| Output |
|
|
|
| |
| Analog Audio | Audio Output (2 ch) | |
|
|
| |
|
| Audio Output (7.1 ch) | |
|
|
|
|
Caution
• When HDMI is selected for Video, no video signals are output from the COMPONENT VIDEO,
• When Component Video or
• The video and audio signals output from the set output terminals are output synchronously (lip synchronization).
• Linear PCM audio signals (2 channels) are output from all terminals other than the ones selected for Audio, regardless of the audio format or the player’s settings.
En
