Pioneer BDP-LX08 operating instructions Restoring all the settings to the factory default settings

Changing the terminals for outputting video and audio signals (Output Terminal Priority)

Set the video and audio terminals to be used.

1 Select and set Options.

Use / to select, then press ENTER.

	TOP MENU	TOOLS
	ENTER
	HOME	RETURN
	MENU
	Initial Setup
	BD PLAYER
Video Out	Output Terminal Priority
Audio Out	On Screen Display		￿On
Speakers	Angle/Secondary Indicator		￿On
HDMI	Hybrid Disc Playback		￿BD
Language	BDMV/BDAV Playback Priority		￿BDAV
Parental Lock	DivX VOD
Options	Auto Power Off		￿On
Setup Navigator

2Select and set Output Terminal Priority  Next Screen. Use / to select, then press ENTER.

3Select the terminal for outputting video signals.

Use / to select, then press .

When a digital output is selected for the video output terminal, Video is fixed at HDMI and cannot be changed.

When an analog output is selected for the video output terminal, Component Video or S-Video/Video can be selected for Video.

	TOP MENU	TOOLS
	ENTER
	HOME	RETURN
	MENU
	Initial Setup
	BD PLAYER
Video Out	Output Terminal Priority

Audio Out

SpeakersVideo S-Video/Video

HDMI	Audio	Analog Audio
Language

Parental Lock

Options

Setup Navigator

•HDMI – HDMI OUT terminal

•Component Video – COMPONENT VIDEO output terminals

•S-Video/Video – S-VIDEO output terminal or VIDEO output terminal

The video and audio signals output from the set output terminals are output synchronously (lip synchronization).

Caution 06

•If the output terminal you want to select at Video is not displayed, use the VIDEO SELECT button to switch between digital and analog output (page 24).

4Select the terminal for outputting audio signals. Use / to select, then press ENTER.

•HDMI – HDMI OUT terminal

•Digital Audio – DIGITAL OUT (OPTICAL) terminal

•Analog Audio – AUDIO OUT (2 ch) terminals or AUDIO OUT (7.1 ch) terminals

The optimum audio signals for the audio format and the player’s settings are output from the output terminal(s) set here.

Caution

•Linear PCM (2-channel) audio signals are output from the audio terminals other than the one set at Audio, regardless of the audio format and the player’s settings.

Restoring all the settings to the factory default settings

1Check that the player’s power is turned on.

2When a disc is playing, press  STOP to stop playback. Eject the disc from the player.

3While pressing  STOP, press  STANDBY/ON. Operate using the buttons on the player’s front panel.

Note

•After restoring all the settings to the factory default settings, use Setup Navigator to reset the player (page 20).

49

En