Beko 26WLZ530HID operating instructions Inserting the CI Common Interface card

9.7.2-Switching to the PC mode

For your LCD-TV to switch to the monitor (PC) mode, press the SOURCE button on your remote control. SOURCE menu will be displayed. Select PC by pressing the Up/Down movement buttons and press the OK button.

9.7.3-PC Access Setting

Enter into the SETUP menu from the Main Menu by pressing the MENU button in the PC mode. In order to make the necessary settings in this menu, you can select the headings with the Up/Down buttons on your remote control to perform the following monitor-related settings.

9.7.4-Auto Position

The most suitable geometric settings in accordance with the entry mode are configured by this function. For this operation, just select the Autoposition tab and press OK button.

9.7.5-Horizontal Position: Horizontal position setting.

9.7.6-Vertical Position: Vertical position setting.

9.7.7-Size:This is the pixel clock frequency. User can narrow down or enlarge the display by selecting a desired value.

9.7.8-Phase:Using the Right/Left movement buttons, you can ensure that the colours and shapes are exactly consolidated on the PC image.

9.7.9-PICTURE FORMAT

You can select the PC image to be displayed in 16:9 or 4:3 formats.

9.8- Inserting the CI (Common Interface) card

CI module and Smart card allows you to view some scrambled (paid) channels in Digital TV mode. When no CI module is inserted in your television, you can only view the current unscrambled digital/analogue channels.

9.8.1-Inserting the CI Module and Smart card

You can not use the smart card in your television independently. You will need a CAM module to use the smart card. Insert your smart card into the CAM module and then insert the CAM Module into the CI slot on your television. When you insert the module correctly, CA Module Inserted appears on the screen and the menu for this module is displayed.

Rear or side view of the TV

9.8.2-Removing the CI Module and Smart card

When removing the Smart card, make sure that you pull the CAM module out completely with the card inserted. CA Module Inserted will appear on the screen.

29