EN
21
Why doesn’t the washing machine spin-dry?
• This may be due to an uneven distribution of clothes in the drum and may
cause an excessive level of vibrations.
• The solution is to select a spin-drying programme.
If this failure is detected, C03 will appear on the display
Why can’t I see any water in the drum during the wash?
• This is due to the fact that the washing machine is provided with a system
which is able to adapt to the load and type of fabrics, adjusting the levels of
water and energy used, in order to preserve the environment.
So, although the water level you can see through the hatch may look low,
there is no cause for concern as washing and rinsing efficiency will still be
optimum.
Why is there still some water in the dispenser?
• This may be because the dispenser needs cleaning. This simple operation
is described in Maintaining and cleaning the appliance. - Cleaning the
detergent dispenser.
Why can’t I open the hatch immediately after the wash has finished?
• Washing machines today are provided with safety systems for users. One of
them is that the washing machine cannot be opened until it is certain that the
drum is quite still. This is why the hatch cannot be opened for 2 minutes.
Why doesn’t the remaining time shown on the clock coincide with the real time left
until the selected cycle finishes?
• This time is for guidance purposes only and may be affected by the
conditions under which the selected programme is being run, e.g. initial water
temperature, size of load or unbalance caused by the garments during spin
drying.
Other indications
• The washing machine can detect other indications. When this happens a
number of other indicators appear on the display: F05, F06..., F10. If this
happens, call the Official Technical Service.