Starting up
Start/Stop button
•To start up the washing machine you have to press the Start/Stop button.
The minutes remaining until the end of washing and drying will appear on the display at all times.
Deactivating the lock function
•The lock function is cancelled when the wash programme comes to an end.
If you want to deactivate the lock function before the end of the programme, you have to hold the Start/Stop button down again for at least 3 seconds. After 3 seconds, the lock function indicator will disappear from the display, and it will go into pause status. Turning to
Off position “0” does not cancel the lock.
Child/key lock function
Child/key lock function selection The lock function ensures that the programme will not be affected if any buttons are pressed. It is used when children could press the buttons, etc. The Child/Key Lock function should be activated after the wash programme has been selected together with all its options.
Activating the lock function
•The lock function is activated by pressing the Start/Stop button and holding it down for at least 3 seconds. The display will show if it is activated.
16
EN
