C If the power cord is damaged, it must be replaced by a cord or special unit provided by either the manufacturer or your after sales service.

C With built-in washing machines, the plug must be accessible after installation.

Pre-cleaning

When your washing machine has been correctly installed, we recommend that you pre-clean the machine.

This is to check that the installation, the connections and the drainage are all correct, and to thoroughly clean the inside of the washing machine before any wash programmes are run (see the operating instructions on the following pages).

Select the normal programme at

60ºC.

Press the Start/Stop button.

9

EN

Page 9
Image 9
Beko BWD 6421 manual Pre-cleaning