Replacing the Interior Light Bulb

REPLACING THE INTERIOR LIGHT BULB

Should the light fail to work switch off at the socket outlet and pull out the mains plug.

Use a cross headed screw driver to remove the light diffuser cover.

Then ensure the bulb is screwed in until it is secure in the bulb holder. Replace the plug and switch on.

If the bulb functions, reassemble by reversing the above procedure, ensure the top cover is in place.

If the light still fails to work obtain a replacement screw cap type 15 Watt (Max) bulb from your local electrical store and then fit it as follows.

1. Switch off at the socket outlet and pull out the mains plug. You may find it useful to remove shelves for easy access.

2.Remove the light diffuser cover screw. Use cross-headed screw driver.

3.Pull off the light diffuser cover and remove the light bulb.

4.Replace the burnt-out light bulb.

5.Reassemble reversing the sequence and operations. First ensure the top of the cover is in place.

6.Carefully dispose of the burnt-out light bulb immediately.

“Replacement light bulb can easily be obtained from a good local electrical or DIY store.”