4Use and Maintenance
4.2Replacing halogen light bulbs (Fig.8):
To replace the halogen light bulbs B, remove the glass pane C using a lever action on the relevant cracks. Replace the bulbs with new ones of the same type. Caution: do not touch the light bulb with bare hands.
Fig.8 |
Fig.9
•Commands (Fig.10) mechanical the key symbols are explained below:
A = LIGHT B = OFF
C = SPEED I D = SPEED II E = SPEED III.
Fig.10
If your appliance has the INTENSIVE speed function, from speed THREE, press key E for 2 seconds and it will be activated for 10 minutes after which it will return to the previously set speed. When the func- tion is active the LED flashes.
To interrupt it before the 10 minutes have elapsed, press key E again. Some models allow activating this function even with speed one and two.
By pressing key F for two seconds (with the hood switched off) the “clean air” function is activated. This function switches the appliance on for ten min- utes every hour at the first speed. As soon as this function is activated the motor starts up at the first speed for ten minutes. During this time key F and key C must flash at the same time. After ten minutes the motor switches off and the LED of key F remains switched on with a fixed light until the motor starts up again at the first speed after fifty minutes and keys F and C start to flash again for ten minutes and so on. By pressing any key for the exclusion of the hood light the hood will return immediately to its normal functioning (e.g. if key D is pressed the “clean air” function is deactivated and the motor moves to the 2nd speed straight away. By pressing key B the function is deactivated).
10 / 11 EN | Hood / User Manual |
|
|
