To add a function to the programme:
1.Select the programme by pressing programme selection button.
2.Press the button of the function that you want to enable and check to see an indicator for the relevant function on the display.
3.You can start the programme by pressing the Start / Pause / Cancel button.
Programme Steps Follow-up
You can follow up the step while current programme is running from the Programme Steps follow up indicator a Washing Step Indicator
b Drying Step Indicator
c End of Programme Indicator
The display shows the steps for washing and drying, respectively, while the selected programme is running. Only the End of Programme indicator lights up when the programme is over. Remaining Time Indicator displays “0:00”.
Cancelling a Programme
Press Start / Pause / Cancel button for three seconds to cancel a programme that is already running. Release the button when symbol start flashing in the display. For a couple of minutes the machine will fulfill the necessary operations required for cancellation. Remaining time indicator displays “0:00”. You may select and operate
a new programme following the programme cancellation process. There might be residues of detergent or rinse aid left in the machine and/or on the pieces being washed depending on the step the previous programme was in at the time of such cancellation.
Changing a Programme
If you want to change running programme, first of all press Start / Pause / Cancel button to switch your machine into pause mode. Second, switch to the desired programme by pressing Programme Selection button. Third, Start the new programme
by pressing Start / Pause / Cancel button again. Your new selection will resume operation from the step in the previous programme (For example, if the previous programme was in rinsing step, the new one will also start from the rinsing step). If you want to run the newly selected programme from the beginning, you have to apply the programme cancellation process first and then select a new programme.
Programming the Time Delay
You can delay the start of the selected programme until 9 hours and 30 minutes with increments of 30 minutes by means of the Time Delay Function. Time Delay can not be set after the programme starts. The selected programme must not be started in order to be able to set the delay time.
Time Delay indicator sand glass will start flashing when the Time Delay button is pressed. You can set the desired time by pressing the Time Delay button. Press the Start / Pause
/Cancel button after setting the time. The Time Delay indicator sand glass and play icon will remain lit on the display during the delayed start countdown and the delay time indicator will display the remaining time. Programme will start automatically when the countdown is over.
24
GB