After you put in the detergent, shut the container lid (D) and ensure you hear the clicking sound.
During the wash programme the detergent will dispense automatically and the lid (D) will remain open when the programme finishes.
Do not use detergent when using the
Detergent residues
Regular use of low temperature washes and/or short duration programmes can lead to undissolved detergent residue build up. We recommend to carry out a service wash at the highest temperature possible every 3 - 4 months with the dishwasher empty and without using detergent. It is not recommended to carry it out with auto programme.
regulator (C).
The dispenser regulator (C) may be set between levels 1 and 6 (6 being the maximum amount of rinse aid usage). Your machine is
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the six position selector. (Position 1: minimum dose, Position 6: maximum dose.) Gradually increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes.
Filling the rinse aid dispenser
Open the rinse aid dispenser lid by pressing the button as shown in the diagram.
Fill up with rinse aid until the container is full to level of ’max’ mark .
Put the lid (E) on and ensure you hear the clicking sound.
Remember to CLOSE the lid after every refill.
Make sure you clean any rinse aid that you might have spilled.
Rinse aid
Use only rinse aid intended for household dishwashers.
The rinse aid is specially formulated to be used in the dishwashers for the prevention of watermarks and scale on dishes and to increase the efficiency of the washing and drying processes. Therefore, make sure that
there is adequate amount of rinse aid in the rinse aid dispenser of your machine.
You can adjust the amount of rinse aid used during the wash programme by turning the rinse aid dispenser
16 GB
