Beko E1 manual TV set up, Picture Menu, Setup Menu, Features Menu

TV set up

The TV set up is accessed through a menu system.

Once you have stored your set up, this is the set up the TV will default to when you switch it on.

Please note

If you do not press any buttons for 20 seconds the TV will exit the menu system.

There are three menus;

•Picture Menu

•Setup Menu

•Features Menu

•Picture Menu

To reach the picture menu press MENU button.

PICTURE

BRIGHTNESS

CONTRAST

COLOUR

SHARPNESS

STORE

NEXT MENU

The picture menu allows you to set up the following:

BRIGHTNESS

CONTRAST COLOUR SHARPNESS

To change, for example, the colour, select it using Program down buttons.

Use the Volume up and Volume down buttons to change the setting.

To save your settings, select STORE and press the OK button. STORED will be displayed.

The Volume level will also be stored (even thouch Volume is not shown in the menu).

Note:

If you play NTSC formatted tape via the scart, the TINT menu will appear to adjust the TINT level.

• Setup Menu

Setup Menu is explained on the page 8

• Features Menu

To reach the feature menu press MENU button 3 times.

	FEATURES
SLEEP TIMER	OFF
ON TIMER	OFF
AVL	ON
LANGUAGE
	EXIT

a) Sleep Timer

The sleep timer automatically switches the set to stand-by after the preset time has elapsed.

You can select the time from 15 to 120 minutes with 15 minutes steps.

There are two ways to set the sleep timer;

1- Select the SLEEP TIMER in the FEATURES menu. Select the desired time by using Volume down or Volume up buttons.

2- You can also use the YELLOW ( ) button on your remote control to select this function. You can increase the switch off time interval by pressing this button repeatedly.

Notes:

The last 60 seconds of the desired switch off time by counting from 59 down. When this time interval has elapsed the set will switch to STAND-BY.

To view the remaining sleep time, press YELLOW ( ) button. To cancel the sleep time select OFF in SLEEP TIMER.

b) On Timer (Model dependant)

Select the on time between 30 minutes to 12 hours by pressing the Volume up button press the numeric buttons or AV to select the program to come on. Switch the TV to stand-by to active on timer.

Note: You cannot select Off timer and On timer together.

If TV is at Stand-by position, you can switch it on at desired time and programme by activating the ON TIMER feature.

To cancel the on time select off in ON	11
TIMER.