Beko E1 manual Tuning the television, Manual Tuning, Please Note

8

Press the AV/TV button to select your input as follows:

1AV1 when using SCART socket 1.

2AV1 S-VHS for S-Video equipment to scart 1 (S-VHS / Scart adapter is needed).

3AV2 when using the PHONO sockets of the TV. (Optional)

Press the AV/TV button again to return to TV.

Tuning the television

There are two ways of tuning your television:

•Manual, where you control the tuning process or Autoprogram where the television does it all automatically.

•TV sets equipped with ATS (Automatic Tuning System) sorts the channels.

Please Note

If the TV is set to a channel with no signal the TV will return to standby after 5 minutes. The time remaining is displayed on the screen. For the last 60 seconds.

Manual Tuning

Tuning the TV is accessed through the SETUP menu.

To access the SETUP menu: Press the MENU button twice. SETUP Menu will appear.

	SETUP
CHANNEL	C 26
SYSTEM	I
FINE TUNE	0
SEARCH
AUTOPROGRAM
CHILD LOCK	OFF
PROGRAM NO	P6
STORE
0	9
	C/S

NEXT MENU

a)If you don’t know the channel number (Tuning with SEARCH function).

Enter the SETUP Menu by pressing the MENU button twice.

In the SETUP Menu select PROGRAM NO and change to P1 using the Program down button to select it and the Volume up or Volume down button to change it.

Starting with Program P1, tune in the first channel as follows: Use the Program up button to select SEARCH.

Press the Volume up or Volume down button to start the tuning search.

The search arrow will appear.

When the search finds a channel signal it will stop.

Identify which channel you are watching (BBC 1, ITV 1 etc.) and decide which program number you want it to be. Or press Volume up again to carry on searching.

Use the Program down button to select PROGRAM NO.

Use the Volume up/down buttons to select the program number.

Use the Program down button to select STORE. Press the OK button and STORED will appear on the STORE line.

You have now stored the first channel.

Use the Program up button to select again SEARCH and continue the tuning procedure until you have tuned in all the programmes you want or the television can receive.

b)If you know the channel number. (Tuning with channel numbers) See page 18

Enter the SETUP menu by pressing MENU button twice.

Press the OK button to select “S” for cable channels and “C” for terrestrial broadcast.

Use Volume up/down button to select the channel number or enter the channel number using the Numeric buttons.

Use the Program down button to select PROGRAM NO.