Beko FC 175F Getting To Know Your Combi Beko Fridge / Freezer, SWITCH USE on page, From Cookers

Models: FC 175F

1 11
Download 11 pages 8.73 Kb
Page 4
Image 4
GETTING TO KNOW YOUR COMBI BEKO FRIDGE / FREEZER

If you have to install your appliance in a cold room, read the LOW AMBIENT

GETTING TO KNOW YOUR COMBI BEKO FRIDGE / FREEZER

 

SWITCH USE on page 12.

 

3.Do not place the appliance near cookers, radiators or in direct sunlight as this will cause your appliance to work harder. If installed next to a source of heat or freezer, maintain the following minimum side clearances:

From Cookers

50 mm (2")

 

 

From Radiators

300 mm (12")

 

 

From Freezers

25 mm (1")

 

 

4.Make sure that sufficient room is provided around the appliance to ensure free air

circulation.

Fit the Two plastic wall spacers supplied with the appliance rotating 1/4 turn to the condenser at the back of the appliance (See Diagram).

5.The fridge/freezer should be located on a

smooth surface. The two front feet

can be adjusted as required. To ensure that your appliance is standing

upright adjust the two front feet by turning clockwise or anti-clockwise, until

the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise.

5

6

Page 4
Image 4
Beko FC 175F Getting To Know Your Combi Beko Fridge / Freezer, SWITCH USE on page, From Cookers, 50 mm, From Radiators