Beko Colour Televisions Picture settings, Setting the picture features, Tilt Model dependant

Picture settings

PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS	ON
CTI
DDVa	ON
COLOUR TEMPERATURE	NORMAL
BACK BACK

MENU

Press » « to open the »MAIN MENU«.

– The »MAIN MENU« appears.

Select »PICTURE« with »«, »« and confirm with

»«.

– The »PICTURE« menu appears.

Select »BRIGHTNESS«, »CONTRAST«, »COLOUR« or

»SHARPNESS« with »«, »« and adjust them with » « or » « .Press »EXIT « to finish the settings.

Note:

After a short while the »PICTURE« menu reappears. The settings are saved as the »USER« picture default setting.

22Setting the picture features

PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS	ON
CTI
DDVa	ON
COLOUR TEMPERATURE	NORMAL
BACK BACK

You can set the noise suppression of the picture. You can set the noise suppression to one of three settings: »NORMAL«, »WARM« and »COOL«.

MENU

Press » « to open the »MAIN MENU«.

– The »MAIN MENU« appears.

Select »PICTURE« with »«, »« and confirm with

»«.

– The »PICTURE« menu appears.

Select »COLOUR TEMPERATURE« with »«, »« and set the desired value with » « or » «. Press »EXIT « to finish the settings.

CTI (Colour Transient Improvement):

You can improve the colour transitions in the picture by selecting ON or OFF.

DDVa (Model dependant) (Dynamic Digital Video Adaption):

You can increase the picture sharpness byselecting DDVa as ON.

IMPORTANT NOTE: Your TV has Digital Comb Filter, DLTI (Digital Luminance Transient Improvement) features to improve picture quality. These features are set ON and they can not be changed by the end user.

TILT (Model dependant):

Because of the structure of the picture tubes, your picture can be lost on the corners of the screen depending on the position of your TV, north-south-east-west.

To clear this effect, you can adjust the TILT setting and prevent the picture loss (Model dependant).