Beko Colour Televisions, IDTV 28C723IDW Connecting a decoder

30

Connecting a decoder

Via SCART

Make sure the TV and decoder are both switched off. Plug one end of the SCART lead

(not supplied) into the back of the decoder and the other end into the SCART1 on the

back of the TV. Switch on the decoder and the TV. Press the »AV « button on the remote

control to select AV1.

Via PHONO lead (Model Dependant)

Make sure the TV and decoder are both switched off. Plug one end of the PHONO lead

into the video and audio out sockets on the back of the decoder and plug the other end

into the video and audio in sockets on the TV.

Press the »

AV

« button repetitively and select the AV3 mode for two scart models or select

AV4 mode for three scart models.

Please Note

You can record from one external piece of equipment to another via the TV by connecting

the playback to SCART 1 and the recorder to SCART 2 or SCART 3 and selecting AV1.

You cannot watch the TV.

You can connect NTSC supported equipment to the TV via the SCART sockets and

adjusting the colour via the PICTURE menu.

Select TINT by using » « button and use the adjust the colour to »« or » « buttons.

R

L

MONO

VIDEO

110-240 V~

50/60 Hz 35 W

ANTENNA IN

OUT TV DIGITAL AUDIO

OUT

L

R

AUDIO OUTS-VIDEO OUT

VIDEO OUT

EURO AV 1 TV

EURO AV 2 DECODER

R

L

AUDIO OUT

AV1

AV2

AV3

COAX

DECODER

Contents

Main CONTENTS Special features of your integrated digital television Receiving digital stations Safety is Important Safety instructions ! Television Special features Electrical connections In the box CONNECTION/PREPARATION Inserting batteries into the remote control Connecting the aerial and the mains cable + - - + Control Unit Front Panel General External Connections: (Front or side) (External connections: (Rear) External connections table STD X Remote control Switching on and off Selecting channels TELEVISION OPERATIONS Basic functions Selecting stations from lists Picture settings Swap function SETTINGS Hint: Tuning digital television stations Automatic search Manual search Resetting the TV Installation Selecting the subtitle language Selecting the audio language Service Preference Data Service Access control (optional) Special features for digital stations Signal information Adult lock (block channel positions) Creating a list of favourites Displaying television and radio channel lists. Moving channels (Favourite channels only) Autoprograming TV guide Tuning channels using the search Fine tuning analogue television stations Special features for analogue stations Deleting stations Sorting television analog stations Tuning the analogue television channels by entering the channel numbers Moving to digital setup menu Parental lock (block channel positions) Creating a list of favourites Entering station names (maximum of 5 characters) Skipping television stations Sound mode Sound settings Sound type Volume Balance Subwoofer (Model dependantl) Select Sound menu and press button to access subwoofer. For changing user settings; Automatic volume levelling Dynamic bass (Model dependant) Picture settings Setting the picture features SPECIAL FEATURES Changing the menu language Entering the switch-on and off times Picture format Widescreen TV sets: 4:3 Sets: TELETEXT MODE To enter Text mode To exit Text mode To select a page of text TV/text mix TELETEXT MODE Page hold To select a sub page To reveal information Fastext Connecting external equipment Headphones (Model Dependant) Connecting a video recorder Page Connecting a DVD player Connecting a decoder Connecting TV with video and satellite/digital receiver Connecting TV with camcorder S-Video TV Game Player Connecting TV games and computer AV1/AV2/AV3 AV3 (3 scart models only) Troubleshooting Symptom Possible cause Solution General technical specifications Technical specifications table Page HOW TO OBTAIN SERVICE