ELECTRICAL REQUIREMENTS

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply.

We recommend that this appliance is connected to the mains supply via a suitable switched and fused socket in a readily accessible position. Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO Authorised Service Agent.

WARNING! THIS APPLIANCE MUST BE EARTHED

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

TRANSPORTATION INSTRUCTIONS

1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, it must only be laid on its left hand side when standing in the front of the appliance. After bringing it to upright position,it must not be operated for at least 4 hours to allow the system to settle.

3.Failure to comply with the above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.

6.Empty any water in the drain tray before moving. See section ‘Defrosting’ and ‘Care & cleaning’ for further information.

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the

IMPORTANT! FITTING A DIFFERENT PLUG

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

(See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug marked 'E' or with

the symbol or coloured green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked 'N' or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked 'L' or coloured red.

E

GREEN &

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6mm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YELLOW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OR

 

 

 

 

 

 

L

 

 

 

 

GREEN

32mm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BROWN

 

6mm.

 

 

 

 

 

 

 

 

 

 

 

N

 

 

 

 

 

 

OR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

22mm.

RED

 

 

 

 

BLUE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12mm.

OR

 

 

6mm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BLACK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CORD GRIP

FUSE

FITTED WITH BS 1362 13A FUSE ALWAYS FIT BS 1362 REPLACEMENT CARTRIDGE FUSE

appliance as you might injure your fingers and hands.

IMPORTANT : This appliance is not designed for stacking with any other appliance.

Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

“IMPORTANT: Make sure that mains cable is not caught under the appliance during and after carrying / moving the appliance, to avoid the mains cable becoming cut or damaged."

Do not allow children to play with the appliance or tamper with the controls. BEKO plc declines to accept any liability should the instructions not be followed.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box.

If in doubt contact a qualified electrician.

3

4

Page 2 Page 4
Page 3
Image 3
Beko TDA 531-1 manual Electrical Requirements, IMPORTANT! Fitting a Different Plug
Page 2 Page 4

TDA 531-1, TDA 531 specifications

The Beko TDA 531 and TDA 531-1 are two exemplary models in the realm of modern clothing care appliances, designed to cater to the demands of contemporary households. These steam irons blend innovative technology with user-friendly features to provide exceptional performance and convenience.

One of the standout characteristics of the Beko TDA 531 series is the powerful steam generation capability. Both models feature a robust steam output that ensures wrinkle-free clothes with minimal effort. This makes them ideal for tackling even the toughest creases, whether on delicate fabrics or heavy linens. The continuous steam function allows users to maintain a consistent level of steam, offering great results in a shorter amount of time.

The TDA 531 and TDA 531-1 are equipped with a lightweight and ergonomically designed structure, making them easy to handle and maneuver. This is particularly beneficial for extended ironing sessions, as it reduces user fatigue. Both models also feature a non-stick soleplate, which glides effortlessly over fabrics, preventing snags and ensuring smooth operation. The soleplate is designed for durability, providing long-lasting performance.

Another notable feature is the vertical steam function, which allows users to steam garments while they are hanging. This is a time-saving option for those who wish to freshen up clothing without the need to lay them flat. Additionally, the self-cleaning system in both models helps maintain the iron's performance over time by preventing the buildup of mineral deposits, ensuring longevity and reliability.

Safety is also a priority with the Beko TDA 531 and TDA 531-1. These models come equipped with an automatic shut-off feature that activates when the iron is left inactive for a specified period. This added layer of protection not only enhances safety but also provides peace of mind to users who may need to step away during ironing tasks.

In conclusion, the Beko TDA 531 and TDA 531-1 steam irons stand out in the market for their combination of powerful steam performance, ergonomic design, and safety features. Perfect for both everyday households and those with a keen eye for clothing care, these models truly exemplify Beko’s commitment to quality and innovation. Choosing either of these models guarantees efficient, effective, and enjoyable ironing experiences.
Top Page Image Contents