IMPORTANT

INSTALLATION INSTRUCTIONS

1.The space in the room where the appliance is installed must not be smaller than 10 cubic metres.

2.Do not put your fridge freezer in a cold room where the temperature is likely to go below +5 degrees C (41 degrees F) during night time and/or especially in winter.

This fridge freezer has been designed to operate in ambient temperatures between +5 and +32 degrees C (41 and 90 degrees F) Therefore if the appliance is installed in an unheated/cold room (eg: conservatory/annex/ shed/garage etc) then the appliance will not operate causing the freezer compartment to run warmer and as a result the storage time of frozen food may be reduced.

3.Do not place the appliance near cookers, radiators or in direct sunlight as this will cause your appliance to work harder. If installed next to a source of heat or freezer, maintain the following minimum side clearances:

From Cookers

50 mm (2")

From Radiators

300 mm (12")

From Freezers

25 mm (1")

4.Make sure that sufficient room is provided around the appliance to ensure free air circulation.

Fit the Two plastic wall spacers supplied with the appliance rotating 1/4 turn to the condanser at the back of the appliance (See Diagram).

5.The fridge/freezer should be located on a smooth surface. The two front feet can be adjusted as required. To ensure that your appliance is standing upright adjust the two front feet by turning clockwise or anti-clockwise, until the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise.

6.Refer to cleaning and care section to prepare your appliance for use.

7.A special receptacle is supplied to store the mains plug during transit. The receptacle is fixed at the back of the

cabinet, on the right hand side of the

compressor. (See diagram) Gently remove the plug from the receptacle. Never pull the mains cord, you may damage the appliance. In the case of transportation, ensure you locate the plug in the receptacle

provided to avoid transit damage.

5

GETTING TO KNOW YOUR BEKO FRIDGE / FREEZER

1

2

3

11

4

6

12

5

 

6

 

7

12

8

 

9

 

10

13

 

1.

Freezer compartment

8.

Salad crisper cover

2.

Ice cube tray

9.

Salad crisper

3.

Interior light housing

10.

Adjustable front feet

4.

Thermostat knob

11.

Egg compartment

5.

Fridge compartment

12.

Adjustable door shelf

6.

Adjustable shelves

13.

Bottle shelf

7.Defrost water collection channel- Drain tube

6

Page 3 Page 5
Page 4
Image 4
Beko TDA 531-1 manual Installation Instructions
Page 3 Page 5

TDA 531-1, TDA 531 specifications

The Beko TDA 531 and TDA 531-1 are two exemplary models in the realm of modern clothing care appliances, designed to cater to the demands of contemporary households. These steam irons blend innovative technology with user-friendly features to provide exceptional performance and convenience.

One of the standout characteristics of the Beko TDA 531 series is the powerful steam generation capability. Both models feature a robust steam output that ensures wrinkle-free clothes with minimal effort. This makes them ideal for tackling even the toughest creases, whether on delicate fabrics or heavy linens. The continuous steam function allows users to maintain a consistent level of steam, offering great results in a shorter amount of time.

The TDA 531 and TDA 531-1 are equipped with a lightweight and ergonomically designed structure, making them easy to handle and maneuver. This is particularly beneficial for extended ironing sessions, as it reduces user fatigue. Both models also feature a non-stick soleplate, which glides effortlessly over fabrics, preventing snags and ensuring smooth operation. The soleplate is designed for durability, providing long-lasting performance.

Another notable feature is the vertical steam function, which allows users to steam garments while they are hanging. This is a time-saving option for those who wish to freshen up clothing without the need to lay them flat. Additionally, the self-cleaning system in both models helps maintain the iron's performance over time by preventing the buildup of mineral deposits, ensuring longevity and reliability.

Safety is also a priority with the Beko TDA 531 and TDA 531-1. These models come equipped with an automatic shut-off feature that activates when the iron is left inactive for a specified period. This added layer of protection not only enhances safety but also provides peace of mind to users who may need to step away during ironing tasks.

In conclusion, the Beko TDA 531 and TDA 531-1 steam irons stand out in the market for their combination of powerful steam performance, ergonomic design, and safety features. Perfect for both everyday households and those with a keen eye for clothing care, these models truly exemplify Beko’s commitment to quality and innovation. Choosing either of these models guarantees efficient, effective, and enjoyable ironing experiences.
Top Page Image Contents