4Before operating

STARTING

Final Check

Before you start using the refrigerator check that:

1.The feet have been adjusted for perfect levelling.

2.The interior is dry and air can circulate freely.

3.Clean the interior as recommended under "CLEANING AND CARE."

4.Insert the plug into the wall socket and switch on the electricity supply.

5.You will hear a noise as the compressor starts up. The liquid and

gases sealed

within the refrigeration

system may also give rise to noise,

whether the

compressor is running

or not which is quite normal.

6.We recommend that you set the thermostat at 3 (three) and monitor the temperature to ensure the appliance maintains desired storage temperatures (See section Temperature Control and Adjustment).

7.Do not load the appliance immediately it is switched on. Wait until the correct storage temperature has been reached. We recommend that you check the temperature with an accurate thermometer (see; Temperature Control and Adjustment).

Important Notes :

1.If there is a power failure do not open the door. Frozen food should not be

affected if the failure lasts for less than 25 hours. If the failure is longer, then the food should be checked and either eaten immediately or cooked and then

re-frozen.

2.If you find the freezer door difficult to open just after you have closed it, don't worry. This is due to the pressure difference which will equalise and allow the door to open normally after a few moments.

3.You will hear a suction sound just after closing the door. This is quite normal.

11

EN

Page 12
Image 12
Beko TF546APS, TF546APW manual Before operating, Starting, Final Check