ELECTRICAL REQUIREMENTS

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply. Rating label is on the left hand side of the freezer liner. We recommend that this appliance is connected to the mains supply via a suitable switched and fused socket. The socket must be in an accessible position. Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO Authorised Service Agent.

WARNING! THIS APPLIANCE MUST BE EARTHED

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers can be obtained from a BEKO authorised service agent.

TRANSPORTATION INSTRUCTIONS

1.The freezer should be transported only in a vertical upright position.

The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, the product must only be laid on its left hand side (when facing the door front) and it must not be operated for at least 4 hours to allow the system to

settle after the appliance is brought back to upright position.

3.Failure to comply with the above instructions could result in damage occuring to the freezer. The manufacturer will not be held responsible if these instructions are disregarded.

4.The freezer must be protected against rain, moisture and other atmospheric influences.

5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal support or pipework at the back of the appliance as you might injure your fingers and hands or damage your product.

IMPORTANT! FITTING A DIFFERENT PLUG

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

(See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug marked 'E' or with

the symbol or coloured green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked 'N' or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked 'L' or coloured red.

GREEN &

 

 

 

 

6mm.

YELLOW

 

 

OR

 

GREEN

32mm.

 

L

 

 

 

BROWN

6mm.

 

 

 

N

 

 

OR

 

 

22mm.

RED

 

BLUE

 

 

 

6mm.

 

 

12mm.

OR

 

 

 

 

 

 

BLACK

 

 

 

 

CORD GRIP

FUSE

FITTED WITH BS 1362 13A FUSE ALWAYS FIT BS 1362 REPLACEMENT CARTRIDGE FUSE

IMPORTANT : This appliance is not designed for stacking with any other appliance.

Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

IMPORTANT : Make sure that mains cable is not caught under the appliance during and after carrying / moving the appliance, to avoid the mains cable becoming cut or damaged.

Do not allow children to play with the appliance or tamper with the controls. BEKO plc declines to accept any liability should the instructions not be followed.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box.

If in doubt contact a qualified electrician.

4

3

Page 2 Page 4
Page 3
Image 3
Beko TZDA 503 manual Electrical Requirements, IMPORTANT! Fitting a Different Plug
Page 2 Page 4

TZDA 503 specifications

The Beko TZDA 503 is a highly efficient and modern upright freezer that has garnered attention for its impressive features, advanced technologies, and user-friendly characteristics. Designed with functionality and performance in mind, this freezer is ideal for households seeking ample storage space for frozen goods.

One of the standout features of the Beko TZDA 503 is its generous storage capacity. With a total net volume of 148 liters, this freezer offers plenty of room to store your frozen foods, whether it's fruits, vegetables, meats, or pre-prepared meals. The adjustable shelves provide flexibility, allowing users to customize the storage space according to their needs.

In terms of design, the Beko TZDA 503 showcases a sleek, modern aesthetic that fits seamlessly into any kitchen environment. Its vertical arrangement makes it easy to access items, while the door features a user-friendly handle that ensures effortless opening and closing. Additionally, the appliance is equipped with a reversible door, allowing homeowners to adjust the door swing direction based on their kitchen layout.

The Beko TZDA 503 is also packed with innovative technologies aimed at enhancing efficiency and performance. One notable feature is its Frost Free technology, which eliminates the need for manual defrosting. This not only saves time but also maintains optimal storage conditions without the hassle of ice buildup. The appliance operates at a quiet noise level, ensuring minimal disruption in the home.

Energy efficiency is another key characteristic of the Beko TZDA 503. With an energy rating of A++, this freezer is designed to consume less energy while delivering powerful freezing capabilities. This translates to lower electricity bills and a reduced environmental impact, making it an economical choice for conscientious consumers.

Temperature management is made easy with the adjustable thermostat, allowing users to set their desired freezing level depending on the type of food stored. The internal lighting ensures visibility and makes locating items quick and convenient.

Overall, the Beko TZDA 503 stands out as a reliable and efficient appliance for any kitchen. Its impressive capacity, advanced technologies, and user-centered design make it a popular choice among consumers looking for a dependable freezer that meets their freezing needs. Whether for bulk buying, meal preparation, or preserving seasonal produce, the Beko TZDA 503 is well-equipped to handle a variety of storage needs.
Top Page Image Contents