Beko TZDA 503 Temperature Control And Adjustment, 1 = Lowest cooling setting Warmest setting

Models: TZDA 503

1 9
Download 9 pages 51.25 Kb
Page 5
Image 5
The operating temperature is regulated by the temperature control.

TEMPERATURE CONTROL AND ADJUSTMENT

The operating temperature is regulated by the temperature control.

1 = Lowest cooling setting (Warmest setting)

Fast Freeze = Highest cooling setting (Coldest setting)

Please choose the setting according to the desired temperature.

The interior temperature also depends on ambient temperature, the frequency with which the door is opened and the amount of food kept inside.

Frequently opening the door causes the interior temperature to rise.

For this reason, it is recommended to close the door again as soon as possible after use.

The normal storage temperature of your appliance should be -18 °C (0 °F). If the thermostat knob is turned counter clockwise from position 1. Lower temperatures can be obtained by adjusting the thermostat knob towards position Fast Freeze.

We recommend checking the temperature with a thermometer to ensure that the storage compartments are kept to the desired temperature. Remember to take the reading immediately since the thermometer temperature will rise very rapidly after you remove it from the freezer.

STORING FROZEN FOOD

Prepacked commercially frozen food should be stored in accordance with the

frozen food manufacturer's instructions for a 1 = Lowest cooling setting (Warmest setting) frozen food storage compartment.

To ensure that the high quality achieved by the frozen food manufacturer and the food retailer is maintained the following should be remembered:

1.Put packets in the freezer as quickly as possible after purchase.

2.Do not exceed "Use By", "Best Before" dates on the packaging.

3.For hygiene reasons, always wrap food using a suitable packaging material before storing in your appliance to avoid contact with the appliance surface.

7

8

Page 5
Image 5
Beko TZDA 503 manual Temperature Control And Adjustment, The operating temperature is regulated by the temperature control