Laundry remains wet at the end of the programme
•Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent.
C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and
Machine does work. Nothing is displayed on the screen.
The plug might not be plugged in the
mains outlet. | Check the plug. |
Fuse may have blown. | Check the fuse. |
Electricity may be cut off. | Check the supply power. |
The “On/Off” button might have not | Press this button. |
been pressed. |
|
The machine did not start after the program was selected and the «Start/Pause/ Cancel» button was pressed.
The front door may be ajar.
The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your machine, water
Water may have been cut off.
You can restart your machine by pressing the «Start/Pause/Cancel» button for a short time after ensuring that the water is not cut off.
AIf you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
36
EN
