Beko WI 1382 user manual Starting the Program, Progress of program

Time delay

With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes.

1.Open the loading door, place the laundry inside and fill detergent drawer.

2.Set the washing program, temperature, spin speed and, if required, select the auxiliary functions.

3.Press “Time delaying” buttons “+” and “-” to set your desired time delay. The Time delaying symbol will flash.

4.Press “Start/Pause/Cancel” button. Then the time delay starts to count down. The Time delaying symbol will light up. The Start symbol will light up.

	The “:” in the middle of the displayed
•	time delay will start to flash.
	More laundry may be loaded or taken
	out during the time delay period. At
	the end of the time delay countdown
	process, time delaying symbol
	fades and the washing starts as the
	program duration is displayed.

Changing the delay time

If you want to change the time during the countdown:

1.Press “Start/Pause/Cancel” button. “ : “ in the middle of the screen will stop flashing. The Standby symbol will light up. The Time delaying symbol will flash. The Start Symbol will fade.

2.Press “Time delaying” buttons “+” or “-” to set your desired time delay.

3.Press “Start/Pause/Cancel” button. The Time delaying symbol will light up. The Standby symbol will fade.

The Start symbol will light up.

4.The “:” in the middle of the displayed time delay will start to flash.

Cancelling the time delay

If you want to cancel the time delay countdown and start the program immediately:

1.Press “Start/Pause/Cancel” button. The “:” in the middle of the displayed time delay will stop flashing.

2.Start symbol will fade. The standby symbol and the time delaying symbol will flash.

3.Press time delaying button “-” to decrease the desired time delay. Program duration after 30 minutes shall be displayed.

4.Press Start/Pause/Cancel Button to start the program.

Starting the Program

1.Press Start/Pause/Cancel button to start the program.

2.The start symbol which indicates that the program has started will light up.

3.The door locks and the door locked symbol will light up.

4.The Symbol of the relevant step (prewash, main wash, rinse, softener and spin) that the program has started from will light up.

Progress of program

The progress of a running program is shown through a number of symbols on the screen.

•At the beginning of each program step, the relevant symbol in the series of symbols will light up and thus, at the end of the program, all symbols will remain lit up. The symbol that lights up at the far right of the series of symbols indicates the step that is being carried out.

Pre-wash

When “prewash” auxiliary function is selected, prewash symbol will light up to indicate the beginning of prewash step.

Main wash

Main wash symbol will light up to indicate that the main wash cycle has started.

Rinse

Rinse symbol lights up at the beginning of the rinse step.

Softener

Softener symbol lights up at the beginning of softener step.

Spin

Spin symbol will light up at the beginning of the final spin, during “Spin” and “Pump” special programs.

25

EN