Touch Sensor Controls
Digital Radiant Cooktop
Function error code
If an error occurs in the control operation, all the displays will flash “E” or “F” and the cooktop will beep.
To correct:
1.Touch any ON/OFF pad to reset the control.
2.If this corrects the problem, set the control to the desired setting to begin cooking again.
3.If the error is not cleared, allow the cooktop to cool completely.
4.After cooling, touch any ON/OFF pad again to reset the control.
5.If the error is still not cleared, turn off the cooktop power at the circuit breaker or fuse box for one minute.
6.If the error reappears turn off the cooktop power and call for service.
If a power failure occurs
After a power failure, when power is restored, the unit will show flashing “8” in the control displays for a few seconds and then return to the normal OFF position.
If a momentary power failure occurs during cooktop use all surface units will turn off and will stay off when power is restored. When power is first restored the cooktop displays will flash all 8’s for a few seconds during which time the control will be checking the circuits for proper operation. Set the control to the desired setting to begin cooking again.
12