Metal marks and scratches
1.Be careful not to slide pots and pans across your cooktop. It will leave metal markings on the cooktop surface.
These marks are removable using the cleaning cream with a scrub sponge and/or razor scraper.
2.If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop.
This should be removed immediately before heating again or the discoloration may be permanent.
WARNING: Carefully check the bottom of pans for roughness that would scratch the cooktop.
Glass Surface – Potential for Permanent Damage
Damage from sugary spills and melted plastic
Our testing shows that if you are cooking high sugar mixtures such as jelly or fudge and have a spillover, it can cause permanent damage to the glass surface unless the spillover is immediately removed.
1.Turn off all surface units affected by the spillover. Remove hot pans.
2.Wearing an oven mitt:
a.Use the razor scraper to move the spill to a cool area on the cooktop.
b.Remove the spill with paper towels.
3.Any remaining spillover should be left until the surface of the cooktop has cooled.
4.Don’t use the surface units again until all of the residue has been completely removed.
NOTE: If pitting or indentation in the glass surface has already occurred, the cooktop glass will have to be replaced. In this case, service will be necessary.
To Order Parts
To order Cerama Bryte® cream and the razor | Cerama Bryte® Cream . . . | .# WX10X300 |
scraper, please call our | Razor Scraper | .# WX5X1614 |
Kit | # WB64X5027 |
(Kit includes cream and razor scraper)
17
