Touch Controls
Digital Radiant Cooktop
Using the bridge surface units separately
Center | Right |
rear | rear |
element | element |
To use each circular element separately:
1. Touch the ON/OFF pad. |
2. Touch the INCREASE and/or |
DECREASE pads to choose the |
Touch these |
pads to use |
the center |
rear element |
separately. |
Touch these | Touch this pad |
pads to increase | to use the right |
or decrease the | rear element |
heat setting. | separately. |
desired heat setting. The display shows |
your heat setting. |
NOTE: If you touch the INCREASE pad first the surface unit will come on at the highest (H) heat setting. If you touch the DECREASE pad first the surface unit will come on at the lowest (L) heat setting.
There are eleven heat settings ranging from Low (L) to High (H) to choose from.
3.To turn a surface unit off, touch the ON/OFF pad again.
NOTE: To use the right element separately use the right rear controls and touch the pad. To use the center element separately use the center
rear controls.
Using the bridge surface unit
Center | Right |
rear | rear |
element | element |
Bridge
The controls can be used to create an oblong heated area.
Because of its bigger dimensions, larger pans can be used on the bridge surface unit.
Choose pans that match the bridge surface unit area as closely as possible.
To use the bridge element:
1.Touch the ON/OFF pad.
2.Touch the bridge pad.
3.Touch the INCREASE and/or DECREASE pads to choose the desired heat setting. The display shows your heat setting.
These controls | Touch these | Touch this pad to |
cannot be used | pads to increase | use both elements |
when the bridge | or decrease the | combined with the |
surface unit is | heat setting. | bridge element |
being operated. |
| between them. |
NOTE: If you touch the INCREASE pad first the surface unit will come on at the highest (H) heat setting. If you touch the DECREASE pad first the surface unit will come on at the lowest (L) heat setting.
There are eleven heat settings ranging from Low (L) to High (H) to choose from.
4.To turn a surface unit off, touch the ON/OFF pad again.
10