Touch Controls
Digital Radiant Cooktop
Introduction
A cooling fan will start and run as soon as any surface unit is turned on. This is to insure safe and reliable operation of the cooktop. This fan constantly cools the critical components of the cooktop. Under certain extreme periods of usage, this fan may continue to run after you complete cooking and you turn the cooktop off. It will continue to cool the cooktop and the controls until an acceptable temperature is reached. The fan will then turn itself off.
The touch controls give you precise control of the surface units. You can quickly switch back and forth between a steady low heat and full power or anywhere in between.
1.To turn a surface unit on, touch the
ON/OFF pad and touch the INCREASE and/or DECREASE pads to choose the desired heat setting. The control will beep each time a pad is touched. The display shows your heat setting.
2.To turn a surface unit off, touch the ON/OFF pad again.
Be sure to set the correct control for the surface unit you wish to use.
The cooktop will not turn on if two or more touch control pads are touched at the same time.
Single unit |
| Single/Bridge | ||||
control |
| unit control | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single unit |
| Dual | Warmer unit | |||||||
control |
| unit control |
|
| control | |||||
|
|
|
|
|
|
|
|
|
|
|
Indicator
Hot Surface Indicator
How to lock the cooktop
IMPORTANT: As a safety feature, you can lock the entire cooktop at any time.
To lock the cooktop, press and hold the LOCK pad for 2 seconds. A signal will sound and the lock pad will light indicating the cooktop is locked. To unlock, press and hold the LOCK pad again for 2 seconds. A signal will sound and the light will go out, indicating the cooktop is unlocked.
Locking the cooktop will prevent surface units from accidentally being turned on by children or pets.
Always lock the cooktop when it is not in use and before cleaning.
If the cooktop is locked while surface units are in use they will automatically shut off.
Lock/unlock
control
Press and hold for two seconds to lock and unlock.
8