
Problem | Reason | Solution |
Detergent residue in the | Detergent is put in wet drawer. | Dry the detergent drawer before putting |
detergent drawer. (**) |
| in detergent. |
| Detergent has gotten damp. | Keep detergents closed in an environment |
|
| free of humidity and do not expose them |
|
| to excessive temperatures. |
| Water pressure is low. | Check the water pressure. |
|
|
|
| The detergent in the main wash compartment | Check the holes and clean if they are |
| got wet while taking in the prewash water. | clogged. |
| Holes of the detergent compartment are |
|
| blocked. |
|
|
|
|
| There is a problem with the detergent drawer | Call the Authorized Service Agent. |
| valves. |
|
|
|
|
| Detergent might be mixed with the softener. | Do not mix the softener with detergent. |
|
| Wash and clean the dispenser with hot |
|
| water. |
| Regular drum cleaning is not applied. | Clean the drum regularly. For this, please |
|
| see 4.7.2. |
Too much foam forms in | Improper detergents for the washing machine | Use detergents appropriate for the |
the machine. (**) | are being used. | washing machine. |
| Excessive amount of detergent is used. | Use only sufficient amount of detergent. |
|
|
|
| Detergent was stored under improper | Store detergent in a closed and dry |
| conditions. | location. Do not store in excessively hot |
|
| places. |
|
|
|
| Some meshed laundry such as tulle may foam | Use smaller amounts of detergent for this |
| too much because of their texture. | type of item. |
|
|
|
| Detergent is put in the wrong compartment. | Put the detergent in the correct |
|
| compartment. |
| Softener is being taken early. | There may be problem in the valves |
|
| or in the detergent dispenser. Call the |
|
| Authorized Service Agent. |
Foam is overflowing from | Too much detergent is used. | Mix 1 tablespoonful softener and ½ |
the detergent drawer. |
| l water and pour into the main wash |
|
| compartment of the detergent drawer. |
|
| Put detergent into the machine suitable |
|
| for the programmes and maximum |
|
| loads indicated in the “Programme and |
|
| consumption table”. When you use |
|
| additional chemicals (stain removers, |
|
| bleachs and etc), reduce the amount of |
|
| detergent. |
|
|
|
Laundry remains | Excessive foam might have occurred and | Use recommended amount of detergent. |
wet at the end of the | automatic foam absorption system might have |
|
programme. (*) | been activated due to too much detergent |
|
usage. |
| |
|
| |
|
|
|
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
A CAUTION: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
45 / EN | Washing Machine / User’s Manual |