Beko WMG 10454 W user manual 42 / EN, Washing takes longer, Manual, With display, Countdown

Problem	Reason	Solution
Washing takes longer	Water pressure is low.	ŠŠMachine waits until taking in adequate
time than specified in the		amount of water to prevent poor washing
manual.(*)		quality due to the decreased amount
		of water. Therefore, the washing time
		extends.
	Voltage might be low.	ŠŠWashing time is prolonged to avoid poor
		washing results when the supply voltage
		is low.
	Input temperature of water might be low.	ŠŠRequired time to heat up the water
		extends in cold seasons. Also, washing
		time can be lengthened to avoid poor
		washing results.
	Number of rinses and/or amount of rinse	ŠŠMachine increases the amount of rinse
	water might have increased.	water when good rinsing is needed and
		adds an extra rinsing step if necessary.
	Excessive foam might have occurred and	ŠŠ Use recommended amount of detergent.
	automatic foam absorption system might have
	been activated due to too much detergent
	usage.
Programme time does not	Timer may stop during water intake.	ŠŠTimer indicator will not countdown until
countdown. (On models		the machine takes in adequate amount of
with display) (*)		water. The machine will wait until there is
		sufficient amount of water to avoid poor
		washing results due to lack of water. Timer
		indicator will resume countdown after this.
	Timer may stop during heating step.	ŠŠTimer indicator will not countdown
		until the machine reaches the selected
		temperature.
	Timer may stop during spinning step.	ŠŠAutomatic unbalanced load detection
		system might be activated due to the
		unbalanced distribution of the laundry in
		the drum.
Programme time does not	There might be unbalanced load in the	ŠŠAutomatic unbalanced load detection
countdown. (*)	machine.	system might be activated due to the
		unbalanced distribution of the laundry in
		the drum.

42 / EN Washing Machine / User’s Manual