Bel Canto Design manual CD-2Remote Control Operation

CD-2 Remote Control Operation

The CD-2 Remote Control has a compre- hensive set of control features that are not available on the front panel control.

To access all CD-2 control features press the button marked CD on the remote control. e.One Dac or Preamp functions can be controlled by selecting DAC or PRE on the remote. The Main CD controls will still operate in the DAC and PRE modes.

Standby: Toggles the CD-2 into and out of Standby.

Display: Toggles the Display on and off. When in Off mode the Display will come on momentarily when changing the CD-2 operation.

Mute: When in variable output mode this will toggle the analog outputs from Soft to Hard Mute and Un-muted modes. Soft mute is indicated by two decimal points in the far right of the diaply . . and Hard mute is indicated by 4 deci- mals on the display . . . .

Pause : This toggles the Pause mode on and off. The Mode Indicator will show the pause or play mode as appro- priate.

Stop: The solid square indicates Stop and will place the CD-2 in Stop mode

when pressed. The CD-2 will remain on the current track and re-start the track when Play is pressed.

PLAY>: This button initiates playback of the track that is displayed.

VOL>: This increases the volume setting in Variable Output mode. It has no func- tion in Fixed Output Mode. The display will show the volume level while chang- ing.

<VOL: This decreases the volume set- ting in Variable Output mode. It has no function in Fixed Output Mode. The dis- play will show the volume level while changing.

<<: Track Decrement to reduce the track number for playback.

>>: Track Increment to increase the track number for playback.

<<: To slow playback speed in real time. Pressing twice will reduce speed further, press Play to resume normal playback.

>>: To increase playback speed in real time. Pressing twice will increase speed further, press Play to resume normal playback.

© 2007 bel canto design, Ltd. page 8 CD-2 User’s Guide 0607revA