Bel Canto Design manual CD-2Remote Control Operation

CD-2 Remote Control Operation

Rpt1: This will allow repeated playback of the current track while in play mode. The Mode Indicator changes from the bottom left corner to the top left corner to indicate this mode. Press Rpt1 to turn the repeat mode off. Stopping playback will also turn the repeat mode off.

Rpt All: This will allow repeated play- back of the entire CD while in play mode. The Mode Indicator changes from the bottom left corner to a full height Mode Indicator to indicate this mode. Press Rpt All to turn the repeat mode off. Stopping playback will also turn the repeat mode off.

TIME: This allows placing the Display in a mode that shows the track time played while the CD is playing or Paused.

Pressing the TIME button will change the Display back to standard mode.

Number Buttons: The 1-9 and 0 but- tons can be used to randomly select any track number for playback. Track 10 and above are directly selected by key- ing in the number. If you try to select a track beyond the number of tracks on the CD no action will result and the cur- rent track will continue playing.

No other remote buttons are active for use with the CD-2.

© 2007 bel canto design, Ltd. page 9 CD-2 User’s Guide 0607revA