ADDITIONAL SAFTEY REQUIREMENTS

Please carefully read each item of the operating instructions and safety precautions before using this product. Use extra care to follow the warnings written on the product itself and/or in the operating instructions. Keep the operating instructions and safety precautions for future reference.

Caution: to reduce the risk of electrical shock, do not remove any of the cover panels.

No user-serviceable parts inside. Refer all servicing to qualified service personnel only.

To prevent fire or shock hazard, do not allow liquids to spill or objects to fall into any openings of the product.

This unit is supplied with a 3 pin grounded AC plug. Always insert the ac plug into a grounded outlet. Do not remove the ground pin or disable the ground for any purpose.

Before making any connections to the unit, first turn off the power and then disconnect the ac power cord.

When installing the unit in your system, make certain to allow a minimum of 1½ inches of ventilation on each side of the unit. Also allow at least 2½ inches of ventilation space above the unit. Improper ventilation of the unit may cause overheating, which may damage the unit and it to fail. Place the unit on a solid surface only. i.e. not on carpet, etc.

Do not place the unit near heat sources such as direct sunlight, stoves, heat registers, radiators or other heat producing equipment.

To prevent damage to the digital or analog output circuitry, be certain not to short the output signal pin(s) to ground. Ensure that your output cables do not have any internal shorts before connecting them.

IMPORTANT NOTICE

Due to the computer-based circuitry used in this product, it is imperative that the player be connected to a ground via its three-wire AC power cord. It is important that the AC power outlet, which the unit is plugged into, is actually grounded. Failure to do so will severely compromise the performance, reliability and safety of use of the unit.

It is also important to prevent contact with static electricity when connecting other components and cables to the unit. When connecting cables, simply place one hand on top of the player and then grasp the metal “barrel” of the cable with the other hand and plug (unplug) the cable into (from) the appropriate jack on the unit.

At times a snapping sound may occur or the unit may “lockup” and fail to operate. This is NOT A MALFUNCTION of the unit. This is normally caused by exposure to static electricity and can be cured by turning off the power amplifier(s) and then turning the unit off and then on with the rear mounted power switch.

Ventilation is an important issue when placing the unit in a system. Make certain that the unit is in a well- ventilated area or rack unit.

Please take note, that some power line conditioners defeat the AC power ground on their outlets. If the intention is to plug the unit into a line conditioner, check with your dealer to make certain that the particular conditioner that is intended for use DOES NOT DEFEAT THE AC GROUND on its AC outlets.

DO NOT remove the cover from the player, as there are no user serviceable components inside. Refer servicing and updating to qualified service personnel only.

5

Page 5 Page 7
Page 6
Image 6
Bel Canto Design PL-1A manual Additional Saftey Requirements
Page 5 Page 7

PL-1, PL-1A specifications

Bel Canto Design has long been synonymous with high-performance audio equipment, and its PL-1A and PL-1 models are no exception. These preamplifiers stand out in the world of high-fidelity audio for their refined technology, elegant design, and exceptional sound quality.

The Bel Canto PL-1A is a state-of-the-art digital preamplifier that caters to audiophiles demanding precision and versatility. It features a fully balanced signal path, which helps to minimize noise and distortion, ensuring that the music signal remains pure and unaltered. The PL-1A employs advanced digital signal processing technology, which not only enhances the audio performance but also provides a range of connectivity options to accommodate various audio sources.

One of the standout features of the PL-1A is its high-resolution asynchronous USB input, allowing users to connect their computers or digital audio players seamlessly. This input supports high sample rates, making it ideal for high-definition audio formats. Additionally, it includes multiple digital inputs such as coaxial and optical, along with analog inputs, providing flexibility for integrating different audio components.

The PL-1A also comes with an intuitive user interface, making it easy to navigate through the various settings and options. The remote control allows users to adjust volume levels, select inputs, and control other features without the need to get up from their listening position, enhancing the overall convenience.

The design of the PL-1A is not just functionally excellent but also visually appealing. Its sleek chassis is made of high-quality materials, giving it a premium look and feel that complements any audio setup. The attention to detail in both the design and craftsmanship ensures that it not only performs exceptionally well but also stands the test of time.

On the other hand, the Bel Canto PL-1 serves as a more traditional analog preamplifier, offering a warm, rich sound that many audiophiles crave. It features a robust power supply, low-noise circuits, and high-quality components that contribute to its stellar audio performance. The PL-1 is designed for both vinyl enthusiasts and digital audio lovers, providing inputs for turntables as well as digital sources.

Both models embody Bel Canto Design’s commitment to quality, innovation, and state-of-the-art audio technologies, making them ideal choices for anyone looking to elevate their listening experience. With their advanced features, aesthetic appeal, and superior sound quality, the Bel Canto PL-1A and PL-1 preamplifiers promise to satisfy even the most discerning audiophiles.
Top Page Image Contents