Belkin OmniView® Secure KVM Switch User Manual F1DN102U F1DN104U F1DN108U Common Criteria supplement
This section supplements the Belkin Quick Installation Guide in accordance with ADO_IGS.1 Common Criteria Assurance Measure requirements.
This User Guidance and Common Criteria EAL 4 validation apply to the TOE Common Criteria Evaluated version of OmniView™ Secure KVM Models listed below:
F1DN102U Version v.321211
F1DN104U Version v.321211
F1DN108U Version v.321211
Before you begin: The Users of the Belkin OmniView™ Secure KVM must review all associated
documentation and guidance, prior to proceeding with installation and use of the KVM switch.
1.1Receipt and preparation of TOE and Environment prior to installation
Receipt
•Assure that tamper seals are intact on the KVM switch.
Environment preparation
•The Belkin OmniView KVM secure must be located in a physically secure location providing physical protection and limited (authorized user) access controls.
1.2Verification of Common Criteria components
The following are authorized devices for the Common Criteria Evaluated configuration. Assure that installation processes resulting in the following hardware/firmware configuration:
TOE | Belkin Secure KVM Switch 2 Port PN # F1DN102U v.321211 (or) | ||
| Belkin Secure KVM Switch 4 | Port PN # F1DN104U v.321211 (or) | |
| Belkin Secure KVM Switch 8 | Port PN # F1DN108U v.321211 | |
| (and) Firmware Version 3.16 |
| |
Environment | USB Mouse (Peripheral Group Member) |
| |
Environment | USB Keyboard (Peripheral Group Member) |
| |
Environment | Monitor – VGA connector | (Peripheral Group Member) | |
Environment | Host Computers Qty 2, 4 or 8 based on KVM used | (IT Environment Computer | |
| resources) |
|
|
Belkin OmniView® Secure KVM Switch User CC supplement
