1.3Usage Assumptions

The Common Criteria Evaluated Configuration requires the following assumptions in usage of the OmniView Secure KVM device. These assumptions should be assured either through facility or procedural provisions.

An AUTHORIZED USER possesses the necessary privileges to access the information transferred by the TOE.

USERS are AUTHORIZED USERS.

The TOE meets the appropriate national requirements (in the country where used) for conducted/radiated electromagnetic emissions. [In the United States, Part 15 of the FCC Rules for Class B digital devices.]

Only the selected COMPUTER’S video channel will be visible on the shared MONITOR.

The TOE is installed and managed in accordance with the manufacturer’s directions.

The AUTHORIZED USER is non-hostile and follows all usage guidance.

The TOE is physically secure.

Vulnerabilities associated with attached DEVICES (SHARED PERIPHERALS or SWITCHED COMPUTERS), or their CONNECTION to the TOE, are a concern of the application scenario and not of the TOE.

2.Common Criteria Administrative Guidance - OmniView® Secure KVM Switch User Manual F1DN102U F1DN104U F1DN108U

The follow section lists the supplemental information relating to a Common Criteria deployment for the OmniView® Secure KVM Switch User Manual in accordance with AGD_USR.1 & AGD_ADM.1 Common Criteria Assurance Measure requirements.

Usage Assumptions

Note that the usage assumptions listed in Section 1.3 must be maintained to assure all TOE security objectives are maintained during usage.

Applicability of OmniView® Secure KVM Switch User Manual to Common Criteria

The OmniView Secure KVM Switch User Manual applies in its entirety to the Common Criteria Evaluated Configuration.

Belkin OmniView® Secure KVM Switch User CC supplement

Page 2
Image 2
Belkin F1DN102U, F1DN108U, F1DN104U user manual Usage Assumptions