Manuals / D-Link / Computer Equipment / Network Card

D-Link DUB-E100 specifications Installation is Complete, Link Led, Tx/Rx Led

Models: DUB-E100

1 12

Page 10

Installation is Complete!

Installation of the DUB-E100 is complete. The LINK LED should be solid green, indicating a good physical connection between the DUB-E100 and the network. The TX/RX LED indicates when data is being transmitted or received. If both LEDs are unlit, there may be a problem with the physical connection. Check the cables between your DUB-E100, the computer, and the network. Verify that your network switch, hub, or router is powered on.

LINK LED:

Lights up solid green when the DUB-E100 has a good physical connection to the network.

TX/RX LED:

Flashes green when data is transmitted/received at 100Mbps. When data is transmitted/received at 10Mbps the LED flashes amber.

Page 10

Image 10

D-Link DUB-E100 specifications Installation is Complete, Link Led, Tx/Rx Led

Contents

CD-ROM Software, Manual and Warranty Before You BeginCheck Your Package Contents DUB-E100Connecting the DUB-E100 to Your Computer Click Next Installing the DriversWindows XP Click NextClick Next Installing the Drivers continuedWindows Click NextInstalling the Drivers continued Click NextInstalling the Drivers continued Windows MeClick Next Click Next Select Specify the location of the driver AdvancedClick Finish Installing the Drivers continuedClick Next Windows 98SEInstalling the Drivers continued Click NextClick Next Installing the Drivers continuedwhere D is your CD-ROM drive letter Click FinishLINK LED Installation is CompleteTX/RX LED 1. Can I use my DUB-E100 on a USB 1.1 port? Frequently Asked Questions3. How do I verify that my DUB-E100 is properly installed? 2. Do I need to use a crossover cable or straight-through cable?Tech Support for customers within the United States Technical SupportTech Support for customers within Canada