Belkin F1DP116SEA user manual Network Settings, IP Configuration

Models: F1DP116SEA

1 68
Download 68 pages 12.95 Kb
Page 22
Image 22

Network Settings

You can configure the network IP settings via VT-100 or web interface. This section describes configuration through the web interface.

IP Configuration

The Console Server requires a valid IP address to operate within the user’s network environment. If the IP address is not readily available, contact the system administrator to obtain a valid IP address for the Console Server.

There are two types of IP assignments you can choose from:

Static IP

DHCP (Dynamic Host Configuration Protocol)

The unit ships with DHCP set to default. If no DHCP server is found on your network, the Console Server will boot with the following static IP address: 192.168.2.156.

The new IP configuration setting can be saved by clicking “Save & Reboot”.

18

Page 22
Image 22
Belkin F1DP116SEA user manual Network Settings, IP Configuration