Belkin F1DP116SEA user manual Section

Models: F1DP116SEA

1 68
Download 68 pages 12.95 Kb
Page 17
Image 17

Network Configuration

Assigning IP from the Console Port—VT-100 (Console, Telnet, SSH)

The Console Server also offers a user-friendly, menu-driven command-line interface. You can simply connect a VT-100 terminal to the local console port to access the Console Server. This is useful when you do not know the network settings of the Console Server, and cannot access it. Through the local console port, you can view or change the settings (IP address, subnet mask, etc.).

1.Connect the console port on the rear panel to a serial port on a PC host using the CAT5 cable and the local console port RJ45/DB9F adapter, included with the Belkin Console Server.

2.Configure a terminal emulation program, such as HyperTerminal, using the following parameters:

Baud rate = 115200

Data bits = 8

Stop bits = 1

Parity = none

Flow control = none

Note: User names and passwords are the same as the ones set through the web interface. The defaults are “admin/admin”.

section

13

Page 17
Image 17
Belkin F1DP116SEA user manual Section