Installing the Hardware
Installing the Notebook Network Card in PCs with PCMCIA Slots
1.Turn off the power to the notebook.
2.Insert the Notebook Network Card in the PCMCIA slot of your notebook.
3.Connect the Notebook Network Cards adapter into the connector on the rear of the card.
4.Connect the other end of the
CAT 5 cable and RJ45 plug into the network device.
Note: A standard Belkin network cable cannot be used to
directly connect two
computers. A specially wired cable called a crossover cable is needed to allow you to connect two computers without the use of a network hub or switch. Belkin crossover cables are yellow (Belkin’s
2
