a.Username - Enter the ISP assigned user name. (Assigned by your ISP).

UNDERSTANDING THE WEB-BASED USER INTERFACE

a.Username - Enter the ISP assigned user name. (Assigned by your ISP).

b.Password - Enter your password. (Assigned by your ISP).

c.Retype Password - Confirm the password. (Assigned by your ISP).

d.IP assigned by ISP - Select “Yes” for automatic IP assignment from your ISP. Select “No” only if your ISP assigns you a fixed IP address.

e.IP address - If you are using a fixed IP address, enter the fixed IP address supplied by your ISP.

f.Subnet Mask - If you are using a fixed IP address, enter the subnet mask supplied by your ISP.

g.VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP).

h.Encapsulation - Select your encapsulation type (supplied by your ISP) to specify how to handle multiple protocols at the ATM transport layer. VC-MUX:Point-to-Point Protocol over ATM Virtual Circuit Multiplexer (null encapsulation) allows only one protocol running per virtual circuit with fewer overheads.

LLC: Point-to-Point Protocol over ATM Logical Link Control allows multiple protocols running over one virtual circuit (more overhead).

i.Dial on Demand - By selecting “Dial on Demand” your Router will automatically connect to the Internet when a user opens up a web browser.

j.Idle Time (Minutes) - Enter the maximum idle time for the Internet connection. After this time has been exceeded, the connection will be terminated.

24

Page 26
Image 26
Belkin F5D7630-4A, F5D7630-4B user manual Understanding The Web-Based User Interface