Using the Network USB Hub Control Center
Sharing a USB printer
You can set the Network USB Hub Control Center to share any USB printers on the network.
Note: You must install the printer driver on your computer before enabling sharing.
Note: You must install the Network USB Hub Control Center software on each computer that is going to access the printer.
1.Install the Network USB Hub and printer software, and driver first.
2.Select the printer from the list and click “Connect”. It will install the printer driver for the first time.
3.Repeat steps 1 and 2 on each computer that will share the printer.
4.Select the printer and click “Properties”. Click on the “Connection” tab.
5.Select “This is a shared
printer, automatically connect and disconnect only when printing”.
6.Select the printer from the printer list. It should match the correct printer.
7.Click “Apply” to apply the changes.
1
2
3
4
5
