Belkin 8820AU00370, F7D1301AU user manual Troubleshooting, Support, and Warranty

Troubleshooting, Support, and Warranty

Limiting the wireless transmit rate—Limiting the wireless transmit rate can help improve range and connection stability.. Most wireless cards have the ability to limit the transmission rate.. To change this property in Windows, go to the Windows Control Panel, open “Network Connections”, and double-click on your wireless card’s connection.. In the properties dialog, select the “Configure” button on the “General” tab, then choose the “Advanced” tab and select the rate property..

Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable.. Experiment with different connection rates until you find the best one

for your environment.. Note that all available transmission rates should be acceptable for browsing the Internet.. For more assistance, see your wireless card’s user manual..

I’ve installed this new Router and some of my network clients (computers, game consoles, etc..) are now unable to connect..

Your new Router came pre-configured with a network name and password, found printed on an attached card.. All clients must use this network name and password to connect wirelessly to your Router.. You will need to find the network settings on your client, select the network name printed on the card from the list of available networks, and enter the password when prompted to join the wireless network..

19