
Getting Started
Unpacking
Carefully remove units from packaging. In the unlikely event there is any visible damage, DO NOT attempt to operate the equipment. Notify your dealer or shipping carrier immediately.
Keep this guide for future use.
Equipment Contents
•Base Unit
The base unit has two telephone jacks on the right side and a green light on the front. It plugs into the wall jack and the phone.
•Extension Unit
The extension unit has one telephone jack on the right side and a green indicator light on the front. This is the unit that can be moved from location to location to create a phone jack in an electrical outlet.
•Telephone Cord
A
Equipment Installation
Follow the steps below to install the Wireless Modem Jack for modem equipment.
Base Unit
NOTE: To ensure proper performance, it is important to install the base unit FIRST and then install the extension unit. Also, ensure that both units are securely plugged into the AC wall outlet.
1.Plug either end of the provided telephone cord into either jack on the right side of the base unit, and the other end into any existing telephone wall jack.
2.Plug the phone previously used at that location into the extra jack on the side of the base unit.
3.Plug the base unit into an electrical outlet.
Wall Outlet
Wall Phone Jack
Telephone Cord
Base Unit
3