![STEP 2 - TuneCommand Remote Setup](/images/new-backgrounds/162710/16271011x1.webp)
Operating Instructions
STEP 2 - TuneCommand Remote Setup
1. Turn your Remote with the buttons facing
down. Press the release button to open the battery tray, and gently pull it out of the housing until it stops (Fig. 2). Please do not force the battery tray completely out of the housing.
Fig. 2
Fig. 3
2. Insert the battery with the (+) side facing
up (Fig. 3) and push the battery cover back into the Remote until the button snaps back into place.
3.Now press any of the Remote’s buttons for the TuneCommand Remote and Receiver to pair up. The green lights on the Receiver and the Remote blink when the first button press command from the Remote reaches the Receiver correctly.
Operating Instructions | 4 |
P74852_F8Z024_uk.indd 4 | 29/9/05 4:10:28 pm |