Belkin Gua de instalacin rpida manual P74936F1DW101AeaASQIG.indb 07 54106 pm

Step 5 Connect the Quad-Bus KVM-over-IP or CAT5 KVM Switch to the Server Interface Module using the included Belkin CAT5e Patch Cable or other CAT5 cable.

Server

Step 6 Repeat steps 2 through 5 for each additional USB Sun server you wish to connect.

Step 7 Power up all connected servers.

Step 8 Power up your Quad-Bus KVM-over-IP or CAT5 KVM Switch.

You are now ready to use your OmniView Quad-Bus Server Interface Module. If you have any problems during installation, please refer to the OmniView Quad-Bus KVM-over-IP or CAT5 KVM Switch User Manual.

Note:

Your server should recognize your Server Interface Module and automatically install the HID USB driver if necessary.

8

Installing your Server Interface Module

P74936_F1DW101AeaAS_QIG.indb 8 9/1/07 5:41:06 pm