P73998_F8Q2000_man.qxd 5/23/02 1:36 PM Page 1
Belkin® USB Sync Charger for iPAQ™ H3800 series User Instructions:
Charging your iPAQ handheld through a
powered USB port:
1Plug the Sync Charger’s USB connector into an available USB port on a desktop or laptop computer.
2Slide the cables switch to the Charge position (fig. 1)
3Plug the other end of the Sync Charger cable into the sync connector at the base of the iPAQ handheld. The iPAQ’s charging indicator will flash while charging.
4To remove the cable from the iPAQ’s connector, depress both release levers located on either side of the Sync Charger’s connector and gently slide out.
Charging your iPAQ handheld through an automobile cigarette lighter socket:
1Plug the USB cigarette lighter adapter into the car’s cigarette lighter socket
2Slide the cables switch to the Charge position (fig. 1.)
3Plug the Sync Charger’s USB connector into the USB receptacle located in the tip of the cigarette lighter adapter.
4Plug the other end of the Sync Charger cable into the sync connector at the base of the iPAQ handheld. The iPAQ’s charging indicator will flash while charging.
Length of charge times will vary. A fully discharged iPAQ handheld should charge completely with 2.5 hours if not operated during the charge cycle.
