Hardware Installation
WARNING: Follow these directions closely and in the proper order. Failure to do so may result in mouse and/or keyboard errors.
Before attempting to connecting anything to the OmniCube™ or the computers, make sure everything is powered off. Plugging and unplugging cables may cause irreversible damage to your computers and the OmniCube™. Belkin Components will not be held responsible for damage caused.
1. Find a convenient place to put your OmniCube™. Its small size makes it ideal for the desktop. Take note of the length of your cable kits so that your computers, OmniCube™, keyboard, mouse and monitor are distanced properly.
2. Connect the monitor to the OmniCube™. Using the attached cable which is included with your monitor, connect it to the HDDB15 female port on the back of the OmniCube™ labeled "MONITOR".
MONITOR VGA | VGA | VGA | VGA |
PC4 | PC3 | PC2 | PC1 |
+ |
|
|
|
Back of OmniCube™
7
